10 wcw, 2 mhz hot switching spdt switches
The ENON 10 WCW Hot Switching series of broadband SPDT switches are designed for reliable operation from 2 to 18 GHz. These are robust PIN diode switches with proven field reliability. Proprietary PIN diode architecture minimizes junction temperatures to assure long life under high power conditions. Typical applications include cross-section measurements, polarity selection, transmit/receive, filter banks, complex high power switch matrices, blanking, etc. Consult factory for SPNT configurations. When ordering switches, please indicate if there is a specific frequency band of operation. In some instances, Enon can optimize the performance for your specific needs.
 
features
  • State of the Art PIN Diode Architecture
  • Fast Switching Speeds
  • Low Loss, High Isolation, Broad Band
  • Small Size & Weight
 
specifications
Product Number Freq.
Band GHz		 Insertion
Loss dB (typ)		 Isolation
dB (min)		 VSWR
ES0129 2.0 - 4.0 0.7 50 1.8:1
ES0130 4.0 - 8.0 <1 50 1.8:1
ES0133 8-18 <2 45 2.0:1

Common Switch Specifications
TTL Control Rate:2 MHz maximum.
Logic: TTL, unbalanced. E1 Logic input.
Control: E1 TTL LO J1 to J2, E1 TTL HI J1 to J3.
Configuration: SPDT, Reflecting.
Switching: "Hot" switching.
Switching Speed:40 ns Measured 50% control to the 10 / 90% detected RF signal.
Supply: Positive:+5 V +/- 5% @ 125 mA maximum.
Negative: - 15 V +/- 2% @ 50 mA maximum.
Connectors: RF / Control: SMA - F,
Outline: 2.30 x 1.55 x 0.50 (inches).
Mounting: 0.125 diameter thru, 4 places (inches).
Temperature: Operating: -55 to +85 degrees C.
Storage: -55 to +125 degrees C.
Seal: Units are hermetically sealed
Altitude: 50000 feet. maximum

Back to Main Enon Page
 

 
      home                about us   contact us   investor info
      press releases   articles     careers