     |
 |
 |
2 kw peak, 80 w average spdt switches |
 |
 |
|
The broadband SPDT switches are designed for reliable operation at power levels to 2 kW Peak., 80 W Average from 0.5 to 18 GHz. These are robust PIN diode switches with proven field reliability. Proprietary PIN diode architecture minimizes junction temperatures to assure long life under high power conditions. Small size and weight, fast switching speed and low power consumption make this an ideal candidate for retrofit of ferrite or electro-mechanical designs. Typical applications include cross-sectional measurements, polarity selection, transmit/receive, filter banks, complex high power switch matries, blanking, etc. Consult factory for SPNT configurations. When ordering switches, please indicate if there is a specific frequency band of operation. In some instances, Enon can optimize the performance for your specific needs.
|
|
features |
|
|
|
• State-of-the-Art PIN Diode Architecture
• Fast Switching Speeds
• Small Size & Weight
• Low Loss, High Isolation, Broadband
|
|
specifications |
|
|
|
| Product Number |
Freq. Band GHz |
Peak Power W |
Average Power W |
Insertion Loss, dB |
Isolation dB (min) |
Transition Time uS. (max) |
 |
| ES0005 |
0.5-1 |
2000 |
80 |
0.5 |
55 |
2.0 |
| ES0006 |
1.0-2.0 |
2000 |
80 |
0.6 |
55 |
2.0 |
| ES0007 |
2.0-4.0 |
2000 |
80 |
0.8 |
50 |
2.0 |
| ES0008 |
4.0-8.0 |
2000 |
80 |
1.6 |
45 |
2.0 |
| ES0009 |
8.0-12.0 |
2000 |
80 |
1.8 |
45 |
2.0 |
| ES0010 |
12.0-18.0 |
2000 |
80 |
2.2 |
40 |
2.0 |
Common Switch Specifications
| VSWR: | 1.8:1 maximum, except for ES0010: VSWR is 2.2:1 max. |
| TTL Control Rate: | 100 kHz maximum |
| Logic: | TTL, unbalanced, E1 logic input. |
| Control: | E1 TTL Lo J1 to J2, E1 TTL H1 J1 to J3 |
| Configuration: | SPDT, Reflecting |
| Switching: | "Cold", RF must be gated off during switching. |
| Switching Speed: | Measured 10 to 90% / 90 to 10% of the detected RF signal. |
| Supply: Positive: | V 5% @ 300 mA maximum. |
| Negative: | - 70 V 2% @ 100 mA maximum, except for ES0005 which is - 250v 2% @ 40 mA maximum. |
| Connectors: | RF / Control: SMA - F, Bias: ,Solder Pins. |
| RF Pulse Width: | 10 us. maximum. |
| Mechanical: Outline: | 2.30 x 1.55 x 0.50 (inches). |
| Mounting: | 0.125 diameter thru, 4 places (inches). |
| Operating Temperature: | -55 to +85 degrees C. |
| Storage Temperature: | -55 to +125 degrees C. |
| Seal: | Unit is hermetically sealed. |
| Altitude: | 50000 feet maximum. |
Back to Main Enon Page
|
|
